Product Design, Manufacturing and Branding From Idea to Product,
From Production to Brand
We listen to the idea in your head, analyze it, design it and make it. From the first sketch to the prototype, from series production to your product's brand, the same team is with you at every step.
- ISO 9001:2015Certified
- 60+ materials & colorsWide range
- 2,000+ hours dailyProduction capacity
Your uploaded files are kept confidential.
Our referencesChosen by engineers and procurement teams
- BOSCH
- Bilim Makine
- Elsisan
- Pirge
- Xometry
- Comit
- BOSCH
- Bilim Makine
- Elsisan
- Pirge
- Xometry
- Comit
Our production process · 01 / 05
Idea
Everything starts with a sketch. We listen to your needs, your target audience and your budget; even a drawing on a napkin is enough to get going.
Our expertise
Much more under one roof
If you already have a file
Already have a design?
Upload your 3D model and leave the rest to us. Your parts in four steps.
Upload your file
STL, STEP or OBJ; a single part or a whole assembly.
Choose material and quantity
Our engineers review your file and send your price quickly.
We produce
Your parts are produced and each one passes quality control.
Receive your parts
Delivered to your door by courier, or collected from our workshop.
Resources
Notes from the workshop
3D Printing Cost: 8 Factors That Determine the Price
How is the price of a 3D printed part calculated? From material to infill, supports to quantity: the factors behind the cost and how to lower it.
Carbon Fiber Filament Guide: PA-CF, PA12-CF, PET-CF
When is carbon fiber reinforced filament the right choice? The differences, limits and design tips for PA-CF, PA12-CF, PET-CF and PPS-CF.
Comparing 3D Printing Technologies: FDM vs SLA
We compare FDM and SLA in terms of applications, surface quality, strength and material options. Which one is right for your part?
TAİ Robotik in numbers
A story growing layer by layer
- 6,500+
- Customers worldwide
- 45,000+
- Designs produced
- 80+
- Countries shipped to
- 2,000+hours
- Daily production capacity
Industries we serve · 01 / 07
Automotive
Prototype parts, assembly fixtures, clips and holders. Testable parts in ASA and ABS that resist heat and sunlight.
Good to know
Frequently asked questions
Which services do you offer?
We design your product with idea analysis, 3D design and reverse engineering; make it with 3D printing, series production, laser cutting and laser marking; and brand it with brand identity, brand management, web design and 3D animation. You can start at any step.
I have no 3D file, only an idea. Can we still work together?
Yes. An idea, a sketch, a photo or a part you have is enough. We start with an idea analysis, create the product design and 3D model together and then produce the prototype.
I have an old part without a drawing. Can you make an identical one?
Yes. With reverse engineering we scan and measure the part and create a production-ready 3D model. If you like, we improve the design and produce it again.
Which production methods and materials do you work with?
In our workshop we do FDM, SLA (resin) and multicolor printing with up to 8 colors in one go, with more than 60 material and color options. For other methods your project needs, we plan the right production route together. Details are in our Materials Library.
Is there a minimum order quantity?
No. We produce any quantity, from a single prototype to series of thousands of parts. Once the prototype is approved, the same team continues with series production.
Do you also help with branding after production?
Yes. We get your product ready to sell with logo and brand identity, packaging design, product visuals, 3D animation and a custom website.
How do I get a quote?
You can submit your request in a few steps on the quote page, or email your file (STEP/STL), photos and measurements. Our engineers review it and send your quotation by email.
Do you work with customers outside Türkiye?
Yes. Quotes, design approval and communication all happen online, in English. We ship worldwide and have delivered to more than 80 countries.
Are my files and product idea safe?
Yes. Your files are used only for your project and kept confidential; we sign a non-disclosure agreement (NDA) on request.
From Idea to Product
We turn the idea in your head into a product on the shelf. From product and 3D design to prototypes, from 3D printing to series production, from packaging and blister solutions to your product's digital storefront; the same team is with you at every step. Tell us your idea and let's map out the route together.
- Idea
- Design
- Prototype
- Production
Our Production Network
With our large machine park and team of engineers and designers, we offer more than 2,000 hours of production capacity per day. Every project is matched with the right process, material and team for its technical expectations, budget and quality goals. Whether it is one design or thousands of parts, your job arrives as planned, on time and with the same care.