Material Jetting (PolyJet / MJP) · Photopolymers · Specialty
Full-color photopolymer
Hundreds of thousands of colors, textures and transparency; the visual prototype closest to the real product.
What is Full-color photopolymer?
Full-color PolyJet photopolymers mix CMYK, white and clear resins at the voxel level to produce near-Pantone colors, gradients and textures. Ideal for product visualization, packaging mock-ups and anatomical models.
- Multicolor
- Fine detail
- Transparent
Technical data
Typical values compiled from common manufacturer datasheets; they vary by brand and grade.
| Tensile strength | ≈ 50 – 65 MPa |
|---|---|
| Elongation at break | ≈ 10 – 25% |
| Heat deflection temperature (0.45 MPa) | ≈ 45 – 50 °C |
| Layer thickness | 16 – 32 µm |
Design guidelines for Full-color photopolymer
General guidelines for PolyJet technology. All design guidelines
- Minimum wall thickness1 mm
- Smallest detail0.3 mm
- Clearance for moving parts0.2 mm
- Text and logosEmbossed ≥ 0.5 mm
- Minimum hole diameterØ 1 mm
- Unsupported overhang angleUnlimited (gel support)
Applications
- Marketing prototypes
- Anatomical models
- Packaging and label mock-ups
Advantages
- Realistic color and texture
- Very smooth surface
Limitations
- Mechanically and thermally weak
- Expensive
Comparison
Full-color photopolymer and alternatives
| Property | Full-color photopolymer | Standard resin | PLA | Rubber-like photopolymer |
|---|---|---|---|---|
| Density | 1.18 g/cm³ | 1.18 g/cm³ | 1.23 g/cm³ | 1.15 g/cm³ |
| Tensile strength | 55 MPa | 60 MPa | 63 MPa | 3 MPa |
| Elongation at break | 15 % | 6 % | 20 % | 240 % |
| Modulus (stiffness) | 2.5 GPa | 2.6 GPa | 1.97 GPa | 0.01 GPa |
| Heat deflection (0.45 MPa) | 47 °C | 70 °C | 53 °C | — |
Values are averages of typical ranges; see each material page for details.
Good to know
Frequently asked questions about Full-color photopolymer
What is Full-color photopolymer?
Full-color PolyJet photopolymers mix CMYK, white and clear resins at the voxel level to produce near-Pantone colors, gradients and textures. Ideal for product visualization, packaging mock-ups and anatomical models.
Is Full-color photopolymer heat resistant?
The heat deflection temperature (0.45 MPa) of Full-color photopolymer is about 47 °C. This is low; it is not suitable for hot car interiors, direct sun or hot water.
Can Full-color photopolymer be used outdoors?
It can degrade under prolonged sunlight and UV light. For outdoor use, ASA or another UV-resistant material should be preferred.
Which parts are made with Full-color photopolymer?
Full-color photopolymer is typically used in applications such as marketing prototypes, anatomical models, packaging and label mock-ups.
Which material can be used instead of Full-color photopolymer?
Depending on the application, Standard resin, PLA, Rubber-like photopolymer can be alternatives. You can see the differences in the comparison tables on the material pages.
Does TAİ Robotik produce with Full-color photopolymer?
For Full-color photopolymer, send us your part's dimensions, quantity and operating conditions; we will determine the best production route and, if needed, an equivalent alternative together.
Material Jetting (PolyJet / MJP) · Photopolymers
Similar materials
Let's choose the right material together
Tell us your needs for this material or an alternative we can produce.