FDM · Filaments · Specialty
Wood-filled PLA filament
A decorative filament with the look and scent of wood; can be sanded and varnished.
What is Wood-filled PLA?
Made by mixing fine wood powder into PLA. Printed parts have the texture and color of wood; light and dark rings can be created by changing the nozzle temperature. Suitable for decorative products, models and gifts.
- Economical
Technical data
Typical values compiled from common manufacturer datasheets; they vary by brand and grade.
| Wood content | 10 – 40% |
|---|---|
| Density | 1.15 – 1.28 g/cm³ |
| Tensile strength | 30 – 45 MPa |
Print settings
Recommended starting ranges; fine-tuning is needed for each machine.
| Nozzle temperature | 190 – 220 °C |
|---|---|
| Nozzle | ≥ 0.5 mm recommended (clogging risk) |
Design guidelines for Wood-filled PLA
General guidelines for FDM technology. All design guidelines
- Minimum wall thickness0.8 mm
- Smallest detail0.4 mm (nozzle diameter)
- Clearance for moving parts0.3 – 0.6 mm
- Text and logosEmbossed ≥ 0.6 mm, engraved ≥ 0.8 mm
- Minimum hole diameterØ 2 mm
- Unsupported overhang angle≥ 45° from horizontal; flatter surfaces need support
Applications
- Decorative objects
- Architectural models
- Gifts
Advantages
- Realistic wood look
- Can be sanded and varnished
Limitations
- Low mechanical strength
- Tendency to clog the nozzle
Comparison
Wood-filled PLA and alternatives
| Property | Wood-filled PLA | PLA |
|---|---|---|
| Density | 1.2 g/cm³ | 1.23 g/cm³ |
| Tensile strength | 38 MPa | 63 MPa |
| Elongation at break | 3 % | 20 % |
| Modulus (stiffness) | 3 GPa | 1.97 GPa |
| Heat deflection (0.45 MPa) | 55 °C | 53 °C |
Values are averages of typical ranges; see each material page for details.
Good to know
Frequently asked questions about Wood-filled PLA
What is Wood-filled PLA?
Made by mixing fine wood powder into PLA. Printed parts have the texture and color of wood; light and dark rings can be created by changing the nozzle temperature. Suitable for decorative products, models and gifts.
Is Wood-filled PLA heat resistant?
The heat deflection temperature (0.45 MPa) of Wood-filled PLA is about 55 °C. This is low; it is not suitable for hot car interiors, direct sun or hot water.
Can Wood-filled PLA be used outdoors?
It can degrade under prolonged sunlight and UV light. For outdoor use, ASA or another UV-resistant material should be preferred.
Which parts are made with Wood-filled PLA?
Wood-filled PLA is typically used in applications such as decorative objects, architectural models, gifts.
Which material can be used instead of Wood-filled PLA?
Depending on the application, PLA can be alternatives. You can see the differences in the comparison tables on the material pages.
Does TAİ Robotik produce with Wood-filled PLA?
For Wood-filled PLA, send us your part's dimensions, quantity and operating conditions; we will determine the best production route and, if needed, an equivalent alternative together.
Let's choose the right material together
Tell us your needs for this material or an alternative we can produce.